"A pedal that needs no introduction to any aficionado of guitar effects. Simply the most sought after and highly regarded overdrive pedal of all time."
A kit of components as recommended by Ivlark for assembly of the Klon Centaur stripboard project.
NOTE - these kits are not intended for beginners, so the ability to identify components and values from their markings and to transfer a pictorial layout to physical stripboard is assumed. No written instructions are provided with the kit.
Latest assembly guides and layout are available here.
Manufacturers and product names are mentioned solely for circuit identification and comparison, and where applicable the trademarks are the property of their respective owners who are in no way associated or affiliated with Bitsbox. No cooperation or endorsement is implied.
Kit Contents:
- Resistors:
-
2x 560R
Metal Film Resistor 0.25W 1%
-
2x 1k
Metal Film Resistor 0.25W 1%
-
2x 1.5k
Metal Film Resistor 0.25W 1%
-
1x 1.8k
Metal Film Resistor 0.25W 1%
-
1x 2k
Metal Film Resistor 0.25W 1%
-
2x 4.7k
Metal Film Resistor 0.25W 1%
-
1x 5.1k
Metal Film Resistor 0.25W 1%
-
2x 10k
Metal Film Resistor 0.25W 1%
-
1x 12k
Metal Film Resistor 0.25W 1%
-
2x 15k
Metal Film Resistor 0.25W 1%
-
1x 22k
Metal Film Resistor 0.25W 1%
-
3x 27k
Metal Film Resistor 0.25W 1%
-
1x 47k
Metal Film Resistor 0.25W 1%
-
2x 68k
Metal Film Resistor 0.25W 1%
-
4x 100k
Metal Film Resistor 0.25W 1%
-
1x 392k
Metal Film Resistor 0.25W 1%
-
1x 422k
Metal Film Resistor 0.25W 1%
-
2x 1M
Metal Film Resistor 0.25W 1%
- Capacitors:
- 1x 390pF Ceramic Disc
-
1x 820pF Ceramic Disc
-
1x 2.2nF Ceramic Disc
-
1x 3.9nF Ceramic Disc
-
1x 27nF Polyester Film
-
2x 68nF Polyester Film
-
1x 82nF Polyester Film
-
1x 390nF Polyester Film
-
2x 100nF Polybox
-
7x 1uF 50V Electrolytic
-
2x 4.7uF 40V Electrolytic
-
2x 47uF 25V Electrolytic
- 2x 10k lin 16mm Potentiometer
- 1x 100k linear Dual Potentiometer
- 1x 12V 500mW Zener Diode
- 2x 1N34As Diode - 1N34A substitute.
- 2x 1N4001 Rectifier Diode
- 2x TL072
- 1x ICL7660S
- 1x 95x127mm Stripboard
- 1x 2PDT Footswitch
- 1x 2.1mm DC Chassis Socket
Note: Obsolete components will have been replaced by currently available recommended substitutes - more information available via the blog
here.
